- Guides
- Micro-purchase threshold
Micro-purchase threshold
Updated
The micro-purchase threshold (MPT) is the dollar limit under which a federal agency can buy supplies or services without asking for competitive quotes, as long as the price is reasonable. Since October 1, 2025, the threshold is $15,000 for most purchases, up from $10,000 (FAR 2.101). The government purchase card is the preferred way to make these purchases.
Micro-purchase threshold at a glance
| Amount | $15,000 since October 1, 2025 (was $10,000) |
| Where it’s defined | FAR 2.101 |
| Competition | Not required if the price is reasonable |
| Preferred way to buy and pay | Governmentwide commercial purchase card |
| Public notice | Not required at this size |
| SAM.gov registration | Not required when the card is used to buy and pay |
| Next inflation adjustment | October 1, 2030 |
Thresholds by type of purchase
| Purchase | Micro-purchase threshold |
|---|---|
| Most supplies and services | $15,000 |
| Construction subject to the Wage Rate Requirements (the Davis-Bacon Act) | $2,000 |
| Services subject to the Service Contract Labor Standards | $2,500 |
| Contingency operations, defense against or recovery from cyber, nuclear, biological, chemical or radiological attack, international disaster assistance, or emergency response, inside the U.S. | $25,000 |
| The same purposes, outside the U.S. | $40,000 |
| Purchases from colleges and universities, their affiliated nonprofits, and nonprofit research organizations | $15,000, or higher if the head of the agency decides |
Source: FAR 2.101. The higher contingency amounts don’t apply to construction covered by the Wage Rate Requirements. The $2,000 and $2,500 limits come from the labor laws and aren’t adjusted for inflation (41 U.S.C. 1908).
How micro-purchases work
- No competitive quotes needed. A micro-purchase can be awarded without soliciting quotes if the buyer considers the price reasonable (FAR 13.203).
- Spread among suppliers. To the extent practicable, micro-purchases are supposed to be distributed equitably among qualified suppliers.
- The purchase card comes first. The governmentwide commercial purchase card is the preferred method to buy and pay. Agencies delegate micro-purchase authority to trained, authorized staff, so the buyer may not be a contracting officer at all (FAR 13.201).
- Almost no paperwork. Micro-purchases don’t require contract provisions or clauses, with narrow exceptions.
- No splitting. A requirement can’t be broken into smaller purchases to avoid the rules that apply above the threshold (FAR 13.003).
- No public notice. Agencies have to publicize only purchases over $20,000 (FAR 5.101), so micro-purchases usually aren’t advertised.
How small businesses can sell under the threshold
Because micro-purchases aren’t advertised, the buyer has to find you.
- Accept card payments. The government purchase card works much like a commercial credit card.
- Know when SAM.gov matters. You don’t need a SAM.gov registration when the agency uses the card both to buy and to pay (FAR 4.1102). You do need one for most purchase orders and contracts above $15,000: SAM.gov registration guide.
- Be easy to find and easy to buy from. A one-page capability statement with prices, delivery terms and a direct contact helps program offices that buy on their own. If you hold a GSA Schedule contract, your offerings can also appear on GSA Advantage, GSA’s online marketplace for government buyers.
- Aim for the next band. Purchases above $15,000 and up to $350,000 are generally set aside for small businesses (simplified acquisition threshold), and those over $25,000 are posted on SAM.gov.
Micro-purchases under federal grants
Grant recipients, such as universities, nonprofits and local governments, follow the micro-purchase rules in the Uniform Guidance (2 CFR 200.320):
- They may buy without competitive quotes if they consider the price reasonable and keep documentation supporting that.
- To the extent practicable, they should spread micro-purchases among qualified suppliers.
- Their threshold generally can’t exceed the FAR amount (2 CFR 200.1).
- A recipient may self-certify a higher threshold of up to $50,000 a year with a documented justification: low-risk auditee status, an annual internal risk assessment or, for public institutions, State law.
- A threshold above $50,000 needs approval from the cognizant agency for indirect costs.
The threshold over time
Acquisition thresholds are adjusted for inflation every five years, on October 1 of years divisible by five, based on the Consumer Price Index (41 U.S.C. 1908). The 2025 adjustment raised the micro-purchase threshold from $10,000 to $15,000 and the simplified acquisition threshold from $250,000 to $350,000 (Acquisition.gov). The next adjustment is due October 1, 2030.
Next step
Purchases over $25,000 are posted on SAM.gov. FedLook lists open federal opportunities by agency, state and industry, shows which ones are set aside for small businesses, and sends free alerts when a new one matches your field.
Frequently asked questions
What is the micro-purchase threshold for 2026?
$15,000 for most federal purchases, set in FAR 2.101. It has applied since October 1, 2025, when it rose from $10,000.
Do micro-purchases require competitive quotes?
No. A micro-purchase can be made without soliciting competitive quotes if the buyer considers the price reasonable. To the extent practicable, buyers are supposed to spread micro-purchases among qualified suppliers.
Do I need a SAM.gov registration to sell under the micro-purchase threshold?
Not when the agency uses the government purchase card both to buy and to pay. A SAM.gov registration is needed for most other federal awards, including purchases above $15,000.
What is the micro-purchase threshold for construction?
$2,000 for construction subject to the Wage Rate Requirements (the Davis-Bacon Act). For services subject to the Service Contract Labor Standards, it is $2,500. These two limits aren't adjusted for inflation.
What is the micro-purchase threshold under federal grants?
Generally no more than the FAR amount, $15,000. A grant recipient may self-certify a threshold of up to $50,000 a year with a documented justification; anything higher needs approval from its cognizant agency for indirect costs.
Can a purchase be split to stay under $15,000?
No. FAR 13.003 forbids breaking a larger requirement into smaller purchases to avoid the rules that apply above the micro-purchase threshold.
When will the micro-purchase threshold change again?
Acquisition thresholds are adjusted for inflation every five years, so the next adjustment is due October 1, 2030.
Sources
- Acquisition.gov — Threshold changes effective October 1, 2025
- FAR 2.101 — Definitions
- FAR subpart 13.2 — Actions at or below the micro-purchase threshold
- FAR 13.003 — Policy (simplified acquisition procedures)
- FAR 4.1102 — Policy (SAM registration)
- FAR 5.101 — Methods of disseminating information
- 2 CFR 200.320 — Procurement methods (Uniform Guidance)
- 2 CFR 200.1 — Definitions (Uniform Guidance)
- 41 U.S.C. 1908 — Inflation adjustment of acquisition-related dollar thresholds
FedLook is not affiliated with SAM.gov or any U.S. government agency. Rules change; check the official sources before you act.
Related guides
- Simplified acquisition threshold (SAT)
The simplified acquisition threshold rose to $350,000 on October 1, 2025. What it means, the exceptions, and why it matters for small businesses.
- How to register in SAM.gov
Register your business in SAM.gov for free: what you need, the steps, how long it takes, yearly renewal, and why you don't need a paid service.
- How to write a capability statement
A capability statement is a one-page résumé for your business. What federal buyers look for, what goes in each section, and a template you can copy.
Get new federal contracts by email
Pick an industry or a set-aside. Each morning we'll send the new notices that match, with deadlines and set-asides up front. Free. Unsubscribe in one click.
Free. We use your email only for these alerts and never share it. Privacy