- Guides
- RFQ vs. RFP (and RFI, IFB): what each one means for your bid
RFQ vs. RFP (and RFI, IFB): what each one means for your bid
Updated
An RFQ, request for quotations, asks companies for a price on a clearly defined need. The government usually picks a winner quickly, with little or no negotiation. An RFP, request for proposals, asks for a full proposal: how you’ll do the work, your past performance and your price. The government evaluates it against stated factors and can negotiate. In federal contracting the difference is also legal: a quotation isn’t an offer, a proposal is (FAR 13.004).
Two more documents complete the set. An RFI gathers information before anything is bought. An IFB is the invitation for sealed bids, decided on price.
Want to see what’s open right now? FedLook’s free morning edition lists the day’s new SAM.gov notices. Each notice page shows its type: sources sought, presolicitation or solicitation.
RFI, RFQ, IFB and RFP at a glance
| RFI | RFQ | IFB | RFP | |
|---|---|---|---|---|
| Stands for | Request for information | Request for quotations | Invitation for bids | Request for proposals |
| What it asks for | Information and capabilities for planning | A price, delivery terms, sometimes a short technical response | A sealed bid on fixed specifications | A proposal: technical and management approach, past performance, price |
| Typical use | Market research before a buy | Simplified acquisitions; GSA Schedule orders | Clear requirements where price decides, often construction | Negotiated acquisitions, complex services |
| Is your response an offer? | No | No; the government’s order is the offer | Yes | Yes |
| How the winner is picked | No award | Lowest price or best value, with simplified evaluation | Lowest responsive, responsible bid; bids opened publicly | Best value: tradeoff or lowest price technically acceptable |
| Negotiation | — | Rarely | None | Discussions possible |
How an RFQ works
RFQs belong to simplified acquisition procedures (FAR 13.003). Those cover purchases up to the simplified acquisition threshold, now $350,000. Commercial products and services can be bought the same way up to $9 million, or $15 million in special cases (simplified acquisition threshold). Orders under GSA Schedules are requested with RFQs too, often through GSA’s eBuy (FAR 8.402).
What matters for a bidder:
- A quote isn’t binding on its own. The government’s order is the offer, and a contract forms when you accept it: in writing if asked, or by delivering or starting the work (FAR 13.004).
- Short deadlines, short responses. RFQs often give days, not weeks, and ask for a price sheet plus a page or two. Simplified procedures leave the contracting officer more freedom in how quotes are compared.
- Many RFQs are set aside. Purchases between the micro-purchase threshold and the simplified acquisition threshold are reserved for small businesses unless the contracting officer doesn’t expect two or more competitive small business offers (FAR 19.502-2).
How an RFP works
RFPs are used in negotiated acquisitions under FAR Part 15 (FAR 15.203). In the uniform contract format most RFPs follow, Section L says what to submit and how, and Section M says how it will be evaluated. Read M first: it tells you what wins.
- Two ways to pick a winner. In a tradeoff, the government may pay more for a stronger technical proposal. Under lowest price technically acceptable, it takes the cheapest proposal that passes the technical bar (FAR 15.101).
- Discussions. The government can hold discussions with offerors in the competitive range and ask for revised proposals.
- Debriefing. If you lose, request a debriefing in writing within 3 days after you’re notified of the award. It should take place within 5 days of the request when practicable (FAR 15.506).
RFIs and sources sought: why answer
An RFI asks for price, delivery, market or capability information for planning. Responses aren’t offers and can’t be accepted to form a contract (FAR 15.201). Answering still pays. Above the simplified acquisition threshold, a contracting officer sets a buy aside for small businesses when there’s a reasonable expectation of offers from at least two responsible small firms at fair market prices (FAR 19.502-2). A short, specific response is how you help create that expectation. On SAM.gov these requests usually come as sources sought or special notices (SAM.gov notice types). A one-page capability statement covers most of what they ask.
IFBs and sealed bidding
An IFB leads to sealed bidding (FAR 14.101):
- the specifications are fixed;
- bids are opened in public at a set time;
- there are no discussions;
- the award goes to the responsible bidder whose bid conforms to the invitation and is most advantageous on price and price-related factors.
A bid that changes the terms can be rejected as nonresponsive, so follow the bid schedule exactly.
Which should a small business go after?
- RFQs are the easiest entry point. The bid takes less effort, decisions come fast, and many are set aside. They’re a good way to build federal past performance.
- RFPs take more work but carry larger, longer contracts. Bid when you can show relevant past performance and you’ve read Section M closely.
- IFBs reward sharp pricing and exact compliance, not persuasive writing.
A note on the FAR overhaul
The FAR is being rewritten under the Revolutionary FAR Overhaul, and agencies have issued deviations to apply overhauled parts (Acquisition.gov). Section numbers in a solicitation may therefore differ from the ones above. Ours follow the FAR as published on acquisition.gov (FAC 2026-01).
Next step
Read today’s morning edition on FedLook and look for combined synopsis/solicitations and RFQs in your field. You can also browse open opportunities by agency and set-aside. Before you bid on an RFP, check who did the work last time on the notice page or in contracts ending soon.
Frequently asked questions
What is the difference between an RFQ and an RFP?
An RFQ (request for quotations) asks for a price on a defined need and is used mostly in simplified acquisitions. An RFP (request for proposals) asks for a full proposal, usually technical approach, past performance and price, which the government evaluates against stated factors and can negotiate. A quotation is not an offer; a proposal is.
Is a quotation binding on the company?
No. Under FAR 13.004, a quotation is not an offer. The government's order in response is the offer, and a contract forms when the supplier accepts it, in writing or by starting the work or delivering.
What is an RFI in government contracting?
A request for information, used for market research when the government isn't ready to award. Responses are not offers. RFIs often appear on SAM.gov as sources sought or special notices.
What is an IFB?
An invitation for bids, used in sealed bidding under FAR Part 14. Bids are opened publicly, there are no discussions, and award goes to the responsive, responsible bidder with the best price and price-related factors.
Can an RFQ be used for large purchases?
Yes, in two common cases. Commercial products and services can be bought with simplified procedures up to $9 million, or $15 million in special cases, and orders under GSA Schedules are requested with RFQs, often through GSA eBuy.
How long do I have to request a debriefing after an RFP?
Three days after you're notified of the award, in writing, under FAR 15.506. The debriefing should then happen within five days of your request when practicable.
Sources
- FAR 13.004 — Legal effect of quotations
- FAR 13.003 — Policy (simplified acquisition procedures)
- FAR 15.201 — Exchanges with industry before receipt of proposals
- FAR 15.203 — Requests for proposals
- FAR 15.101 — Best value continuum
- FAR 15.506 — Postaward debriefing of offerors
- FAR 14.101 — Elements of sealed bidding
- FAR 19.502-2 — Total small business set-asides
- FAR 8.402 — eBuy, GSA's electronic request for quotation system
- Acquisition.gov — Revolutionary FAR Overhaul
FedLook is not affiliated with SAM.gov or any U.S. government agency. Rules change; check the official sources before you act.
Related guides
- SAM.gov notice types: sources sought, presolicitation and more
What a sources sought notice is and how to answer it, plus the other SAM.gov notice types: presolicitation, combined synopsis/solicitation, award and J&A.
- Simplified acquisition threshold (SAT) in federal procurement
The simplified acquisition threshold rose to $350,000 on October 1, 2025. What it means, the exceptions, and why it matters for small businesses.
- How to write a capability statement for government contracting
A capability statement is a one-page résumé for your business. What federal buyers look for, what goes in each section, and a template you can copy.
Free · at most one email a morning
Get new federal contracts by email
Pick an industry or a set-aside. Each morning we'll send the new notices that match, with deadlines and set-asides up front. Free. Unsubscribe in one click.
The morning edition by email: free, at most one email a morning, unsubscribe in one click. We use your address for nothing else and never share it. Privacy