1. Guides
  2. Finding work

Teaming agreements: how small businesses team up on federal contracts

A teaming agreement lets companies bid on a federal contract together. How the FAR treats teams, what to put in one, and SBA's rules for set-asides.

A teaming agreement is a contract between companies that plan to bid on a government contract together. Usually one company will be the prime contractor, and the others agree to be its subcontractors if it wins. The FAR calls this a contractor team arrangement. It recognizes two kinds: companies that form a partnership or joint venture to act as the prime, and a prime that agrees to have other companies act as its subcontractors on a specified contract or program (FAR 9.601). For a small business, teaming is often the way into work it couldn’t win alone.

Find a partner: FedLook’s small business search looks up small businesses in SAM.gov by NAICS code, state, 8(a) or HUBZone certification, or the status a company reports, such as SDVOSB or WOSB. No sign-up. When the data allows, FedLook’s notice pages also show who likely did the work last time.

Teaming agreement, joint venture or subcontract

Teaming agreement Joint venture Subcontract
Who holds the prime contract One member of the team The joint venture Another company; you work for it
When it’s signed Usually before the proposal Before the proposal After award, or whenever a prime buys from you
New business No Often a separate company, though not always No
Small business status on a set-aside The prime must be small, and the work it gives to teammates counts against the limits on subcontracting Small if each partner is small under the notice’s NAICS code, or if it’s a mentor-protégé joint venture with a small protégé Matters to the prime: work by a similarly situated subcontractor counts as the prime’s own

Most teaming agreements are the prime-and-subcontractor kind. If the prime wins, a subcontract replaces the teaming agreement.

How the government treats a team

  • It recognizes disclosed teams. The government recognizes a contractor team arrangement when it’s identified, and the companies’ relationships are fully disclosed, in the offer. If the team forms after the offer, it must be disclosed before the arrangement takes effect. The government won’t normally require or encourage a team to dissolve (FAR 9.603).
  • Teams usually form before the offer. Companies can also team later in the process, even after award (FAR 9.602).
  • The prime answers for everything. The government holds the prime fully responsible for performance, whatever the team arrangement. It can still require consent to subcontracts, judge the prime’s responsibility based on the team, and apply its own competition and subcontracting policies. Teaming that violates antitrust law isn’t allowed (FAR 9.604).

What to put in a teaming agreement

There’s no standard government form. Most agreements cover these points:

  1. The opportunity. The solicitation or program, with its notice number.
  2. Who does what. The subcontractor’s scope, and its share of the work as a percentage. On a set-aside, check the shares against the limits on subcontracting first (see below).
  3. The subcontract after award. The prime’s commitment to issue a subcontract for that scope if it wins, with the main terms attached: pricing basis, period and flow-down clauses.
  4. Exclusivity. Whether the subcontractor can join other teams bidding on the same opportunity, and whether the prime can use other companies for the same scope.
  5. The proposal. Who writes which parts, who supplies résumés and past performance, the deadlines, and who pays for what. Usually each company bears its own proposal costs.
  6. Confidential information. What each side shares, how it’s marked and how long it stays confidential. Many teams sign a nondisclosure agreement before they talk details.
  7. Hiring. Whether either company can recruit the other’s employees during the bid and after.
  8. Size and status. Each company confirms its SAM.gov registration, its size under the notice’s NAICS code and its certifications, and agrees to report changes.
  9. When it ends. For example: the prime doesn’t win, the solicitation is cancelled, the companies can’t agree on a subcontract within a set number of days, or one of them is suspended or debarred.
  10. Disputes. Which state’s law applies and how disagreements are resolved.

Is a teaming agreement binding?

Parts of it usually are. The weak spot is the promise of a subcontract after award. In Cyberlock Consulting v. Information Experts, a federal court in Virginia held that a teaming agreement’s post-award provisions were an unenforceable agreement to agree under Virginia law. The parties meant to negotiate a formal subcontract later, and the agreement allowed for one never being signed. The Fourth Circuit affirmed in an unpublished 2014 opinion (Cyberlock v. Information Experts).

Courts in other states may decide differently, and much depends on the wording. A specific workshare, attached subcontract terms and clear language that the companies intend to be bound make the promise more likely to hold. Have a government contracts attorney review the agreement before you sign.

Teaming on a small business set-aside

On a set-aside, SBA’s rules decide whether the team can win.

  • The prime keeps its share of the work. On a services set-aside, the prime can’t pay more than 50% of what the government pays it to subcontractors that aren’t similarly situated. The limit is 50% for supplies, 85% for general construction and 75% for special trade construction, excluding materials (FAR 52.219-14). Work by a similarly situated subcontractor, one with the same small business status that qualified the prime, counts as the prime’s own. Details: small business set-asides.
  • The ostensible subcontractor rule. If a subcontractor that isn’t similarly situated will perform the primary and vital requirements of the contract, or the prime is unusually reliant on it, SBA can find the prime ineligible (13 CFR 121.103(h)(3)). A prime may still use a subcontractor’s experience and past performance in its offer, even an incumbent’s. That alone doesn’t trigger the rule.
  • Joint ventures. A joint venture is small if each partner is small under the notice’s NAICS code. It can submit offers for two years after its first award; after that, the partners can form a new joint venture (13 CFR 121.103(h)). In SBA’s mentor-protégé program, a joint venture of a mentor and its protégé is small for any contract the protégé is small for.
  • The 40% rule. In a mentor-protégé joint venture, the small partner must perform at least 40% of the joint venture’s work (13 CFR 125.8). The same goes for joint ventures on SDVOSB and WOSB contracts, where the certified partner must also be the managing venturer (13 CFR 128.402, 13 CFR 127.506).
  • Past performance. In negotiated procurements, agencies should take into account the past performance of subcontractors that will perform major or critical parts of the work (FAR 15.305). And when a small business prime names its first-tier small business subcontractors in the offer, the agency must consider their capabilities, past performance and experience if the prime’s own record doesn’t show what the award requires (13 CFR 125.2(g)).

How to find a teaming partner

  • By what they do. The small business search finds firms by NAICS code, state and certification or reported status. It doesn’t list contacts; find those on the company’s website.
  • By who did the work before. The incumbent and past winners of similar contracts are natural partners, or the team you’ll be up against. FedLook’s notice pages show who likely did the work last time when the data allows, and you can look up a company registered in SAM.gov by name, CAGE code or UEI in contractors.
  • On the notice. Some SAM.gov notices have an interested vendors list, where companies add themselves to show interest in that opportunity.
  • Through large primes. Large primes post subcontracting opportunities on SBA’s SubNet and have small business liaisons (SBA).
  • With a capability statement. A one-page capability statement is the usual way to introduce your company to a potential partner.

Next step

Find partners in the small business search, then read today’s morning edition for new notices you could bid on together. Get it by email for your state and up to five NAICS codes.

Engraving: a hand holds a magnifying glass over a printed federal notice, the text under the lens in red, with an inkwell and a quill pen
Every notice gets a close reading

Frequently asked questions

What is a teaming agreement?

A contract between companies that plan to bid on a government contract together. Usually one company will be the prime contractor, and the others agree to be its subcontractors if it wins. The FAR calls this a contractor team arrangement, and the term also covers partnerships and joint ventures that bid as the prime.

Is a teaming agreement legally binding?

Parts of it usually are, such as confidentiality and exclusivity. The weak spot is the promise of a subcontract after award. In Cyberlock Consulting v. Information Experts, a federal court in Virginia held that such a promise, with the subcontract left to be negotiated later, was an unenforceable agreement to agree, and the Fourth Circuit affirmed in 2014. A specific workshare and attached subcontract terms make the promise more likely to hold.

What is the difference between a teaming agreement and a joint venture?

Under a teaming agreement, one company is the prime and the others are its subcontractors. In a joint venture, the partners bid together as the prime and share the work and the profit. Under SBA's rules, a joint venture is small if each partner is small under the contract's NAICS code, and it can submit offers for two years after its first award.

Can a small business team with a large business on a set-aside?

Yes, as the prime, if it stays within the limits on subcontracting: on a services set-aside, for example, it can't pay more than 50% of what it receives to subcontractors that aren't similarly situated. If the large subcontractor would perform the primary and vital requirements, or the prime is unusually reliant on it, SBA can find the prime ineligible under the ostensible subcontractor rule.

Does a teammate's past performance count?

It can. In negotiated procurements, the FAR tells agencies to take into account the past performance of subcontractors that will perform major or critical parts of the work. Under SBA's rules, when a small business prime names its first-tier small business subcontractors in the offer, the agency must consider their capabilities, past performance and experience if the prime's own record doesn't show what the award requires.

Do I have to tell the government about a teaming arrangement?

For the government to recognize it, yes. The FAR recognizes contractor team arrangements that are identified, with the companies' relationships fully disclosed, in the offer, or before the arrangement takes effect if it's formed after the offer.

Free · at most one email a morning

Get new federal contracts by email

Pick an industry or a set-aside. Each morning we'll send the new notices that match, with deadlines and set-asides up front. Free. Unsubscribe in one click.

The morning edition by email: free, at most one email a morning, unsubscribe in one click. We use your address for nothing else and never share it. Privacy