1. Opportunities
  2. Department of Agriculture
  3. Agricultural Research Service
  4. 124PCA27Q0008

Lab floor coating repairs at Wyndmoor, PA

You would repair and recoat about 2,700 square feet of a second-floor laboratory floor, plus about 450 linear feet of cove base, at the USDA ERRC Mechanical Services Building in Wyndmoor, PA, within 90 days after notice to proceed.

Official title: MSB Lab Floor Coating Repairs

Deadline
Dec 1, 6:30 AM CT
10 days left
Who can bid
Not stated
The notice names no set-aside
Last time
None found
No contract like it at this agency in USAspending.gov
Place
Glenside, PA
Buyer: USDA Ars Afm Apd

What they're buying

The notice is a total small business set-aside, and the mandatory site visit on 11/17/26 has already passed.

Top catches

Mandatory site visit already passed
“Failure to attend the mandatory site visit will result in the quote being not eligible for award.” C04_Sol_124PCA27Q0008.pdf, page 20

The site visit was held 11/17/26 and registration closed 11/16/26, both before today. The notice says a quote without site visit attendance is not eligible, so do not bid unless your company or the prime attended.

Submission method conflicts
“are due at the place specified in Item 8 by” C04_Sol_124PCA27Q0008.pdf, page 1

The SF 1442 says offers are due at the Item 8 address in Kansas City, but the submission section says to email david.reynolds2@usda.gov. The notice also says it is your responsibility to make sure the government receives the quote by the deadline, so confirm the method and send early.

4 more catches below ↓

Read by AI (Claude Haiku) on Nov 21, 2026 from the notice and 6 of 7 attached files. Every quote on this page was found word for word in the source. Check the official notice before you bid.

The work

  • Repair and recoat about 2,700 square feet of second-floor lab floor and about 450 linear feet of cove base.
  • Prepare existing floor and cove base per manufacturer recommendations, and treat cracks and control and expansion joints.
  • Apply an epoxy base coat and a chemical-resistant polyaspartic finish with non-skid texture, meeting UFGS 09 67 23.14. Color is set at material submittal.
  • Finish must withstand repeated washdown with chlorinated cleansers and disinfectants.
  • Work Monday to Friday, 7:30 AM to 3:00 PM, using the freight elevator (about 6 by 8 feet, rated 5,000 lb) during normal working hours.
  • Provide a warranty on material and labor for at least one year, and a site supervisor on site whenever work is underway.

Who did it before

No match in USAspending.gov: no contract at this agency for the same kind of work ends within a year either way.

What to watch for

  • Mandatory site visit already passed. The site visit was held 11/17/26 and registration closed 11/16/26, both before today. The notice says a quote without site visit attendance is not eligible, so do not bid unless your company or the prime attended.
  • Submission method conflicts. The SF 1442 says offers are due at the Item 8 address in Kansas City, but the submission section says to email david.reynolds2@usda.gov. The notice also says it is your responsibility to make sure the government receives the quote by the deadline, so confirm the method and send early.
  • Deadline time zone unclear. The SAM.gov record gives 6:30 AM with a minus 6 hour offset (Central), but the site is in Pennsylvania and the solicitation says only 0630 local time. Treat the earlier reading as the deadline and get your offer in well before 6:30 AM Central.“Response deadline: 2026-12-01T06:30:00-06:00” SAM.gov record
  • Set-aside status conflicts. The SAM.gov record says set-aside Not stated, but the solicitation says total small business. Check your company against the NAICS 238330 size standard before you spend time on an offer, since the provided text does not state the standard.“Competition is set aside for Total Small Business.” C04_Sol_124PCA27Q0008.pdf, page 1
  • Bid bond requirement conflicts. The SF 1442 says no offer guarantee is required, but the submission section asks for an SF 24 bid bond on offers of $35,000 or more. The RFI answer says the bond applies only above $35,000, so confirm your price stays below that line or line up a surety before you submit.“calls for an SF 24 bid bond of not less than 20 percent of the proposed price for offers of $35,000 or more” C05_RFIs and Responses to Solicitation 124PCA27Q0008.docx
  • Labor classification is your call. The wage determination lists no general painter rate, so you must pick the labor category that fits the work. That choice sets your labor cost and certified payroll rates, so price carefully and request a conformance if no category fits.“The contractor shall select the appropriate labor category for the work being performed.” C05_RFIs and Responses to Solicitation 124PCA27Q0008.docx

Key terms

Who can bidTotal small businesses only, per the solicitationSAM.gov record shows set-aside as Not stated. Prime must have an active SAM registration at closing.C04_Sol_124PCA27Q0008.pdf, page 1
Contract period90 calendar days after notice to proceedEarlier SOW version says 60 DAC; the newer SOW and the solicitation say 90.C04_SOWv2.docx
How they chooseLowest priced technically acceptable (LPTA)The notice also says award goes to best value. See catches.C04_Sol_124PCA27Q0008.pdf, page 19
How to submitEmail to david.reynolds2@usda.govSF 1442 says offers are due at the Item 8 address in Kansas City. Confirm the method.C04_Sol_124PCA27Q0008.pdf, page 18
Questions duePassed: November 19, 2026, 0900 AM Central TimeRFI answers are in amendment 0001. Late questions will not be answered.C04_Sol_124PCA27Q0008.pdf
Estimated valueBetween $10,000 and $30,000Government estimate given in an RFI answer, not in the solicitation itself.C05_RFIs and Responses to Solicitation 124PCA27Q0008.docx
Contract typeFirm fixed price contractSingle award for all line items. Offers that deviate from the solicitation are not considered.C04_Sol_124PCA27Q0008.pdf, page 17
Site visitMandatory, held 11/17/26 at 10:00 AM EST (already passed)Registration deadline 11/16/26 has also passed. Prime attendance is mandatory.C04_Sol_124PCA27Q0008.pdf, page 17

How to respond

  1. Confirm that your company attended the 11/17/26 mandatory site visit and that your SAM.gov registration is active. Without these, the notice says the quote is not eligible.
  2. Send your offer by email to david.reynolds2@usda.gov with a subject line starting RFQ 124PCA27Q0008 and the project title, well before 6:30 AM Central (-06:00) on 12/01/2026, because the notice warns against waiting until the last minute.
  3. Include a transmittal letter with your point of contact, phone, email, SAM UEI and tax ID, and a signed SF 1442 with pricing on page 3 for line item 0001 and every amendment acknowledged, including amendment 0001.
  4. Include two references for epoxy flooring projects completed in the past five years, with project description, location, dollar value, contract dates, and a named contact with phone and email.
  5. Include a signed SF 24 bid bond only if your offer is $35,000 or more, as the RFI answer states. The notice does not say how to submit the bond by email, so Not stated.

Attached files

  • C04_SOWv2.docxRevised statement of work with the 90 DAC completion period and the scope you must price. Read it in full; it is not a form to sign. Read.
  • C04_Sol_124PCA27Q0008.pdfThe solicitation with the SF 1442 offer form, evaluation rules, and clauses. You must complete, sign and return the SF 1442 and acknowledge amendments. Read.
  • C04_SOW.docxEarlier statement of work that says 60 DAC for completion. Read it only to see what changed, and use the revised version for pricing. Read.
  • C04_Wage Determination.pdfDavis-Bacon wage rates for Montgomery County, Pennsylvania (modification 2, dated 10/01/2026). Read it to choose your labor classifications and price labor; no form to sign. Read.
  • C05_RFIs and Responses to Solicitation 124PCA27Q0008.docxQuestions asked at the site visit with government answers on power, drains, bonds, labor classes, and the estimate. Read in full, since answers change scope and pricing. Read.
  • C04_Drawing.pdf Scanned image, not read.
  • C05_Sol_124PCA27Q0008_Amd_0001.pdfAmendment 0001, dated 11/20/2026, which posts the RFI answers and does not extend the deadline. You must acknowledge it on your offer. Read.

Not stated in what we read

  • Drawing C04_Drawing.pdf could not be reviewed because it is a scanned image with no extractable text. The bidder must read it on SAM.gov, since it may show drain, eyewash and box locations.
  • Whether liquidated damages or late completion penalties apply: Not stated.
  • Size standard for NAICS 238330 and whether your company qualifies as small: Not stated.
  • Power supply: one RFI answer says 208V 3-phase at 60A and another says 208V 3-phase at 30A. Confirm the actual service before pricing.
  • Whether the coating must meet BSL-2 sanitation rules: the SOW requires it, but an RFI answer says the work area is not an active laboratory.
  • Who installs the nine 4-inch drains and whether they are in place before coating: the RFI answers do not say who installs them.

Notice text

The purpose of this amendment is to provide responses to RFIs received from the site visit. See attachment section for RFI responses.

As published on SAM.gov. Attachments are listed there; FedLook does not read them yet.

Contacts

As listed in the notice. Ask questions in writing and before the questions deadline, if the notice sets one.

History

  • Nov 21, 2026: first seen in the SAM.gov extract

SAM.gov shows only the latest version of a notice. FedLook keeps a copy of each day's notices and records what changed.

Free · at most one email a morning

Get new notices from Agricultural Research Service by email

Each morning we'll send the new solicitations and sources-sought notices from Agricultural Research Service, with deadlines and set-asides up front. Free. Unsubscribe in one click.

The morning edition by email: free, at most one email a morning, unsubscribe in one click. We use your address for nothing else and never share it. Privacy